Please Note: This dataset is retired, and is displayed for archive purposes only, and may not reflect the most updated information.
Sentinel-6A MF Jason-CS L1A P4 Altimeter High Resolution (HR) NTC Intermediate Outputs with Instrument Calibrations
(JASON_CS_S6A_L1A_ALT_HR_NTC_F)| DOI | 10.5067/S6AP4-1AHNT |
| Short Name | JASON_CS_S6A_L1A_ALT_HR_NTC_F |
| Description | Provides L1A high resolution (HR) non-time critical (NTC; 60-day latency) altimetry intermediate outputs from the Poseidon-4 SAR altimeter on the Sentinel-6A Michael Freilich spacecraft, which are geo-located bursts of Ku-band echoes (at ~140 Hz) with all instrument calibrations applied and full rate complex waveforms for delay/Doppler or HR processing. The S6A NTC product is analogous to the Jason-3 GDR product. |
| Version | F |
| Dataset Type | DEPRECATED |
Questions related to this dataset? Contact podaac@podaac.jpl.nasa.gov
Please contact podaac@podaac.jpl.nasa.gov for more info.
| Name | Long Name | Unit |
|---|---|---|
| /data_140/ku/altimeter_clock | altimeter clock | Hz |
| /data_140/ku/altimeter_power_drift | power scaling: power drift orbital and aging correction (from CAL1) | dB |
| /data_140/ku/altitude | center of mass altitude above the reference ellipsoid | m |
| /data_140/ku/altitude_rate | center of mass altitude rate with respect to the reference ellipsoid | m/s |
| /data_140/ku/attenuation_calibrated | power scaling: ATT calibrated (from ATT table) | dB |
| /data_140/ku/burst_counter | L1A record burst counter | 1 |
| /data_140/ku/cai | Coarse Altitude instruction (CAI, same for 64 pulses) | T0*4 |
| /data_140/ku/cal1_power | intrument impulse response max/total power | dB |
| /data_140/ku/fai | Fine Altitude Instruction (FAI, same for 64 pulses) | T0/16/64 |
| /data_140/ku/i_samples | SAR L1A Ku i-samples, arranged in bursts of 64x256 elements. I samples are scaled to range [-127, +127]. | 1 |
| /data_140/ku/latitude | latitude | degrees_north |
| /data_140/ku/longitude | longitude | degrees_east |
| /data_140/ku/manoeuvre_flag | flag indicating whether the satellite is in a manoeuvre | |
| /data_140/ku/mcd_flags | measurement confidence data (MCD): collection of error flags (Ku-band) | |
| /data_140/ku/off_nadir_pitch_angle_pf | off-nadir pitch angle measured by the platform | degrees |
| /data_140/ku/off_nadir_roll_angle_pf | off-nadir roll angle measured by the platform | degrees |
| /data_140/ku/off_nadir_yaw_angle_pf | off-nadir yaw angle measured by the platform | degrees |
| /data_140/ku/orbit_type_flag | orbit type used | |
| /data_140/ku/p4_instrument_configuration_flags | collection of flags from the P4 instrument source packets | |
| /data_140/ku/p4_mode_flag | P4 mode identifier from the P4 Instrument Source Packets | |
| /data_140/ku/power_scaling_to_antenna | power scaling: overall instrument gain | dB |
| /data_140/ku/ptr_main_lobe_width | PTR main lobe width | m |
| /data_140/ku/q_samples | SAR L1A Ku q-samples, arranged in bursts of 64x256 elements. Q samples are scaled to range [-127, +127]. | 1 |
| /data_140/ku/range_cor_com | range correction: 1-way distance CoM-antenna | m |
| /data_140/ku/range_cor_doppler | range correction: 1-way Doppler compensation | m |
| /data_140/ku/range_cor_internal_delay_att | range correction: 1-way compensation for the delay introduced by the attenuator | m |
| /data_140/ku/range_cor_internal_delay_cal | range correction: 1-way internal calibration path delay (from CAL1) | m |
| /data_140/ku/range_cor_uso | range correction: 1-way USO drift | m |
| /data_140/ku/snr_instr_estimation | instrument estimated SNR from telemetry | dB |
| /data_140/ku/surface_classification_flag | flag indicating the surface type | |
| /data_140/ku/telemetry_type_flag | telemetry type: RAW or RMC | |
| /data_140/ku/time | time in UTC | seconds since 2000-01-01 00:00:00 |
| /data_140/ku/time_tai | time in TAI | seconds since 2000-01-01 00:00:00 |
| /data_140/ku/tm_ambiguity_rank | ambiguity rank (from ISP) | 1 |
| /data_140/ku/tm_burst_num | burst number (from 1 to 7) | 1 |
| /data_140/ku/tm_cor2 | COR2 telemetry | T0/16/64 |
| /data_140/ku/tm_h0 | H0 telemetry | T0/4 |
| /data_140/ku/tm_nimp | number of pulses in 1 radar cycle (from ISP) | 1 |
| /data_140/ku/tm_pri | Pulse Repetition Interval (form ISP) | T0*4 |
| /data_140/ku/tm_source_sequence_counter | instrument source sequence counter | 1 |
| /data_140/ku/tracker_range_calibrated | calibrated 1-way tracker range: CoM to middle range window (at sample samples/2 from 0) | m |
| /data_140/ku/tracker_range_calibrated_diode | calibrated 1-way tracker range from DIODE + DEM: CoM to middle range window (at sample samples/2 from 0) | m |
| /data_140/ku/variable_digital_gain | power scaling: variable digital gain | dB |
| /data_140/ku/velocity_vector | center of mass velocity vector in ITRF, components: [1] x, [2] y, [3] z | m/s |
| /global/ku/antenna_gain | Maximum antenna gain | dB |
| /global/ku/burst_phase_array_cor | burst phase correction | rad |
| /global/ku/burst_power_array_cor | burst power correction | dB |
| /global/ku/cal2_correction | normalized CAL2 for the waveforms correction | 1 |
| /global/ku/g_scaling | Ratio of gain losses between the tracking path and the calibration path | dB |
| /global/ku/processing_configuration_flags | collection of parameters from the processor configuration file | |
| /global/ku/range_cor_external_group_delay | range correction: 1-way external group delay from ground characterization | m |
| /global/ku/range_oversampling_factor | oversampling factor used in the range compression (FFT) | 1 |
| /global/ku/residual_fixed_digital_gain_raw | power scaling: residual on-board fixed digital processing gain for HR RAW | dB |
| /global/ku/residual_fixed_digital_gain_rmc | power scaling: residual on-board fixed digital processing gain for HR RMC | dB |
| pulses | index of pulses within a burst | |
| samples | index of I and Q samples within a pulse | |
| space_3d | index of cartesean coordinates |
Citation is critically important for dataset documentation and discovery. Please cite the data as follows, and cite the reference papers when it is appropriate.
| Citation | Ocean Surface Topography Science Team. 2021. Sentinel-6A MF Jason-CS L1A P4 Altimeter High Resolution (HR) NTC Intermediate Outputs with Instrument Calibrations. Ver. F. PO.DAAC, CA, USA. Dataset accessed [YYYY-MM-DD] at https://doi.org/10.5067/S6AP4-1AHNT
For more information see Data Citations and Acknowledgments.
|
||||||||
| Journal Reference | Donlon, C. J, R. Cullen, L. Giulicchi, P. Vuilleumier, C. R. Francis, M. Kuschnerus, W. Simpson, A. Bouridah, M. Caleno, R. Bertoni, J. Rancaño, E. Pourier, A. Hyslop, J. Mulcahy, R. Knockaert, C. Hunter, A. Webb, M. Fornari, P. Vaze, S. Brown, J. Willis, S. Desai, J-D Desjonqueres, R. Scharroo, C. Martin-Puig, E. Leuliette, A. Egido, W. H. F. Smith, P. B., S. Le Gac, N. Picot, and G. Tavernier. 2021. The Copernicus Sentinel-6 mission: Enhanced continuity of satellite sea level measurements from space, Remote Sensing of Environment, 258. 10.1016/j.rse.2021.112395 |
||||||||
